Make an enquiry
Contact Us
Benchtop autoclave
Small front loading autoclave
Benchtop sterilizer
5.7" touchscreen controller with USB port
Ecofill water reservoir (optional)
Astell Benchtop autoclave testimonial
33 - 63 Litre Benchtop Autoclaves
The 33 to 63 litre front loading 'Benchtop' autoclaves are available in two versions. Both require no plumbing, and operate from a standard single phase power supply. ‘Classic’ and ‘Ecofill’ models are available.
Astell benchtop 'Ecofill' units are one of the most energy efficient autoclaves available. The pressure vessel design ensures the absolute minimum amount of water is used during a sterilization cycle, which not only means comparably low power consumption, but also very quick heating and cooling.
A benchtop autoclave has a variety of uses, being suitable for sterilizing laboratory glassware, plastic receptacles and containers, petri dishes, un-wrapped instruments, media, and occasional discard loads.
In addition to laboratory use, it is not uncommon for benchtop autoclaves to be employed in other areas. In fact Astell regularly supplies its compact sterilizers for use in scientific research, process manufacturing, veterinary and medical healthcare industries to name but a few.
View Product Options Download Brochure View Products in Stock
Description
Ecofill benchtop autoclave:
The ‘Ecofill’ version has an integral reservoir and an in-built 'autofill' water re-circulation system. Once the reservoir is filled, this provides water for up to 15 cycles, and also acts as a collection vessel for condensate and the water that is automatically returned from the chamber at the end of each cycle, minimising water usage.
Classic benchtop autoclave:
The ‘Classic’ version requires manual water-fill and during the cycle condensate leaves the vessel via a silicone tube that can be connected to a heat-resistant bottle.
Astell can custom build the Benchtop range to your specifications.
Model: AMB220 Ecofill (33 litres)Model: AMB420 Classic Fill (33 litres)
Model: AMB230 Ecofill (43 litres)
Model: AMB430 Classic Fill (43 litres)
Model: AMB240 Ecofill (63 litres)
Model: AMB440 Classic Fill (63 litres)
Features
- 316 stainless steel electropolished chamber
- A choice of 33, 43 and 63 litre models
- Base shelf within the chamber
- Calibration and Validation available
- FDA 21 CFR part 11 software option available
- Cooling Lock
- Fast action door closure mechanism
- Five password levels to stop lower level users making changes
- Five pre-programmed cycles and up to 50 available
- Holdwarm / Delayed Start feature
- No mains water supply or drain necessary
- Optimised for low water and power consumption
- Over Temperature Protection
- Pressure Gauge
- Self contained design with no installation required - just fill it with water and plug it in and the machine is ready to be used
- Standard Astell safety features
- Temperature range of 100°C to 138°C (0.2 - 2.4 Bar)
- Timed/Pulsed Free Steaming
- Fully programmable 5.7" Colour Touch Screen controller
- USB interface for downloading controller data
- Validation Port
Product Options
-
21 CFR 11 controller software
-
5 position shelf rack
-
CAT III (BSL3) compliance (>63L)
-
Condensate Bottle (for 'Classic' models only)
-
Ethernet interface
-
Integral Data Printer
-
IQ/OQ documentation
-
Load Sensed Process Timing
-
Morrison Discard Container (180x200x260mm)
-
Pulsar Freesteaming (only available on non-vacuum models)
-
Remote maintenance/diagnosis
-
Simple Vacuum
-
Spare shelf (Benchtop autoclaves)
