AMB Ecofill Benchtop Autoclave (33 to 63 Litres)

Model: AMB220 Ecofill Benchtop Autoclave (33 litres)
Model: AMB230 Ecofill Benchtop Autoclave (43 litres)
Model: AMB240 Ecofill Benchtop Autoclave (63 litres)

AMB Ecofill Benchtop Autoclave (33 to 63 Litres)

The Astell AMB Ecofill Benchtop Autoclaves provide ultra energy, water, and time saving results when compared to similar benchtop sterilizers. Sacrificing the optional CAT III filter upgrade that gives AMB Classic Benchtop Biosafety Level 3 / Containment Level 3 compatibility allows the AMB Ecofill Benchtops to instead include the Ecofill System. This system adds to the already numerous energy saving features found in both the Classic and Ecofill AMB Benchtop Autoclaves, including using only heating one litre generate steam, alongside power saving software developments built into the touchscreen control computer

Astell’s Ecofill system adds a water reservoir to the autoclave. This reservoir is simply filled via a port on the top of unit, rather than filling the bottom of the autoclave chamber with water. Water is automatically supplied to the autoclave chamber on demand, then returned to the reservoir when not required, capturing both water and heat energy. This process allows the Ecofill system to save water, processing time, and energy when compared to an autoclave without Ecofill when cycles are run back-to-back. Additionally, Ecofill autoclaves can run for 15 cycles before it requires refilling, providing greater simplicity and time efficiency. 

Like their Classic equivalents, the AMB Ecofill Autoclaves are plug and play units. Unlike many of their larger counterparts, they do not require plumbing into a water supply or drain system. Furthermore they only require plugging into domestic electricity supply. This makes them simple to install in a laboratory or sterilization room setting – simply place them near enough to an electrical socket and plug them in.

AMB Ecofill Benchtop Autoclaves can sterilize a wide range of items and materials, including laboratory glassware, autoclavable plastics, instruments, liquids, growth media, discard, and biologically contaminated waste materials. The AMB Ecofill Benchtop Autoclaves cannot process Containment Level 3 / Biosafety Level 3 materials – for this functionality please see the AMB Classic Benchtop Autoclave. It can also not process wrapped instruments that require drying, for this ability please see the AMB Ecofill Dry Benchtop Autoclave. Those sterilizing beakers, conical flasks, test tubes, and other similar laboratory glassware and plasticware should consider the Nelldorn Glassware Dryer for a fast and efficient method of drying these items, making them ready for reuse. 

These autoclaves are useful for a wide range of industries, and are found in laboratories across the research, food and drink, industrial and manufacturing, and medical and healthcare sectors.

Astell autoclaves are used in scientific research worldwide.  View selected peer-reviewed research papers that reference their use in experimental methodology. 

Contact us now on +44 (0)20 8309 2031 to find out more, or request a quotation by clicking here. For organisations outside the UK, please contact your national dealer who can be found on our Find a Dealer page.


Range Classification


This product has received Sustainability Awards from SLS. Click to find out more.

Sustainable Use AwardSustainable Raw Material AwardSustainable Distribution and Packaging AwardSustainable Product Manufacturing AwardSustainable Disposal Award


View Products in Stock

Features

  • 316 stainless steel electropolished chamber
  • A choice of 33, 43 and 63 litre models
  • Base shelf within the chamber
  • Calibration and Validation available
  • Cooling Lock
  • Fast action door closure mechanism
  • Five pre-programmed cycles and up to 50 available
  • Float Switch Level Control (water)
  • Holdwarm / Delayed Start feature
  • No mains water supply or drain necessary
  • Optimised for low water and power consumption
  • Over Temperature Protection
  • Pressure Gauge
  • Self contained design with no installation required - just fill it with water and plug it in and the machine is ready to be used
  • Standard Astell safety features
  • Temperature range of 100°C to 138°C (0.2 - 2.4 Bar)
  • Timed/Pulsed Free Steaming
  • Fully programmable 5.7" Colour Touch Screen controller
  • USB interface for downloading controller data
  • Validation Port

Product Options

  • 21 CFR 11 controller software 21 CFR 11 controller software
  • 5 position shelf rack 5 position shelf rack
  • Spare shelf (Benchtop autoclaves) Additional Shelf For Shelf Rack
  • CAT III (BSL3) compliance CAT III (BSL3) compliance
  • Condensate Bottle (for 'Classic' models only) Condensate Bottle (for 'Classic' models only)
  • Morrison Discard Container (180x200x260mm) Discard Container
  • Ethernet interface Ethernet interface
  • Integral Data Printer Integral Data Printer
  • IQ/OQ documentation IQ/OQ documentation
  • Load Sensed Process Timing Load Sensed Process Timing
  • Nelldorn Glassware Dryer Nelldorn Glassware Dryer
  • Pulsar Freesteaming (only available on non-vacuum models) Pulsar Freesteaming ( Not compatible with Simple Vacuum )
  • Remote maintenance/diagnosis Remote maintenance/diagnosis
  • Simple Vacuum Simple Vacuum

SLS Sustainable Features Awards

This autoclave has been recognized by Scientific Laboratory Supplies for its outstanding sustainable features through the following awards.

Sustainable Use Award

Sustainable Raw Material Award

Material resource efficiency principles have been embedded into the design.

Sustainable Raw Material Award

Sustainable Product Manufacturing Award

Feature of manufacturing process designed to generate less waste.

Sustainable Distribution & Packaging Award

Sustainable Distribution & Packaging Award

Manufacturing facility located in UK or Ireland. Country of origin has an Environmental Performance Index (EPI) greater than 60 (2022). Plastic free packaging. Product reduces need for packaging. Packaging return scheme offered.

Sustainable Product Manufacturing Award

Sustainable Use Award

Product feature reduces energy consumption. Product feature reduces water consumption. Built to last. Minimum 5+ year warranty with software support (if applicable) and spare parts and servicing available.

Sustainable Disposal Award

Sustainable Disposal Award

Product is recyclable (supplier must offer a recycling or repurposing scheme for lab products) – excludes packaging.

Icons courtesy of Scientific Laboratory Supplies

Specifications and Options for 33-63 Litre Ecofill Benchtop Autoclaves

AMB220 - 33 Litre Ecofill Benchtop Autoclave

The AMB220 is a Low Water and Power Consumption 33 Litre Ecofill Benchtop Autoclave with a circular front-facing chamber aperture and the Astell Ecofill water and heat recycling system. It is compatible with optional components for additional sterilization, documentation, cooling, connectivity, validation and compliance requirements.

AMB220 product summary
Model codeAMB220
Product name33 Litre Ecofill Benchtop Autoclave
RangeLow Water and Power Consumption
Product typeBenchtop Ecofill Autoclave with a Circular Front Facing Chamber Aperture
DescriptionAn Astell autoclave with a 33 litre chamber that has a circular front-facing aperture, with the Astell Ecofill water and heat recycling system. Compatible with a range of optional components to extend the range of sterilizable load types.

AMB220 specifications

Air

AMB220 air specifications
SpecificationValueUnit
Peak Air Flow For Air BallastN/ALitres per minute
Connecting Airline Hose Size For Air BallastN/Amm
Peak Air Pressure For Air BallastN/Abar
Second Airline Supply Connection SizeN/Amm
Second Peak Air Supply FlowN/ALitres per minute
Second Peak Air Supply PressureN/Abar
Second Air Supply UseN/A

Chamber

AMB220 chamber specifications
SpecificationValueUnit
Chamber Depth358mm
Chamber FinishElectropolished
Chamber Height345mm
Chamber Volume33Litres
Chamber Width345mm

Drain

AMB220 drain specifications
SpecificationValueUnit
Required Features of Drainage SystemN/A
Drain MaterialN/A
Drain PositionN/A
Drain SizeN/Amm
Drainpipe ConnectionN/A
Maximum Drain HeightN/Amm

Dimensions

AMB220 dimensions specifications
SpecificationValueUnit
Dry Weight75kg
Product Height605mm
Product Width520mm
Product Depth808mm
Product Footprint0.25square metres

Electrical

AMB220 electrical specifications
SpecificationValueUnit
Max FrequencyTBCHz
Max Voltage230V
Max WattageTBCkW
Standard Amperage13A
Power Of Steam Source2.3kW
Single Phase AvailabilityAvailable

Water

AMB220 water specifications
SpecificationValueUnit
Maximum Water Flow RateInfinityLitres per minute
Minimum Water Flow Rate0Litres per minute
Water Enters Viaa water jug, filled from a tap

Process

AMB220 process specifications
SpecificationValueUnit
Steam SourceIn-chamber water heating element
AMB220 available options
Option codeOption nameDescriptionFeatures
AAP007Chamber Vessel Cooling Fan SystemBlows air across the external surfaces of the sterilization chamber vessel to improve cooling times.Provides Cooling; Speeds Up Cycle Times
AAR014Load Sensed Process TimingA temperature probe with an armoured lead is added to the chamber. Placed inside fluid loads, this probe provides accurate measurement of liquid temperatures, allowing for faster and more controlled liquid sterilization.Fluid Handling Safety Feature; Improves Liquid Loads
AAR122Ethernet InterfaceAllows the autoclave controller to be monitored from compatible digital systems.Data / Connectivity Feature
AAR130Integral Data-PrinterAllows for the generation of physical records.Generates Cycle Records and Printouts
AVC002SSimple VacuumProvides a vacuum phase before and after sterilization to aid with air removal and load drying, reducing time to sterilization. Suitable for use with in-chamber steam generation.Improves Air Removal; Requires Compressed Air; Speeds Up Cycle Times
CFR021FDA 21 CFR Part 11 Compliant Controller SoftwareProvides compliance to the requirements of 21 CFR Part 11 through data security, data integrity, traceability/audit trails, and electronic signature rules.Compliance / Regulatory Feature; Data / Connectivity Feature
AAN022Additional Shelf For AAN025 Shelf RackAn additional shelf on anti-tilt brackets, typically placed in the centre of the autoclave, providing approximately twice the usable width and depth of chamber space.Modifies Chamber Loading Capabilities
AAN0255 Position Shelf Rack With 2 ShelvesAn additional shelf on anti-tilt brackets, typically placed in the centre of the autoclave, providing approximately twice the usable width and depth of chamber space.Modifies Chamber Loading Capabilities
AAN346Discard ContainerA cuboid container that allows the loading and unloading of multiple items simultaneously.Simplifies Loading and Unloading Procedures
IQ/OQ001IQ/OQ Documents PackageCompletion of the Installation Qualification (IQ) and Operational Qualification (OQ) documentation by an Astell Service Engineer. Requires verification to be valid.Compliance / Regulatory Feature
IQ/OQ003Completion of IQ/OQ DocumentationCompletion of the Installation Qualification (IQ) and Operational Qualification (OQ) documentation by an Astell Service Engineer. Requires verification to be valid.Compliance / Regulatory Feature
UKAS001UKAS CalibrationCalibration of the autoclave to specified temperatures as per the requirements of ISO 17025:2005.Compliance / Regulatory Feature
UKASVALLoad ValidationMultipoint Load Validation Service provided by an Astell Services Autoclave Engineer.Compliance / Regulatory Feature; Provides Validated Evidence of Load Meeting Requirements

AMB230 - 43 Litre Ecofill Benchtop Autoclave

The AMB230 is a Low Water and Power Consumption 43 Litre Ecofill Benchtop Autoclave with a circular front-facing chamber aperture and the Astell Ecofill water and heat recycling system. It is compatible with optional components for additional sterilization, documentation, cooling, connectivity, validation and compliance requirements.

AMB230 product summary
Model codeAMB230
Product name43 Litre Ecofill Benchtop Autoclave
RangeLow Water and Power Consumption
Product typeBenchtop Ecofill Autoclave with a Circular Front Facing Chamber Aperture
DescriptionAn Astell autoclave with a 43 litre chamber that has a circular front-facing aperture, with the Astell Ecofill water and heat recycling system. Compatible with a range of optional components to extend the range of sterilizable load types.

AMB230 specifications

Air

AMB230 air specifications
SpecificationValueUnit
Peak Air Flow For Air BallastN/ALitres per minute
Connecting Airline Hose Size For Air BallastN/Amm
Peak Air Pressure For Air BallastN/Abar
Second Airline Supply Connection SizeN/Amm
Second Peak Air Supply FlowN/ALitres per minute
Second Peak Air Supply PressureN/Abar
Second Air Supply UseN/A

Chamber

AMB230 chamber specifications
SpecificationValueUnit
Chamber Depth465mm
Chamber FinishElectropolished
Chamber Height345mm
Chamber Volume43Litres
Chamber Width345mm

Drain

AMB230 drain specifications
SpecificationValueUnit
Required Features of Drainage SystemN/A
Drain MaterialN/A
Drain PositionN/A
Drain SizeN/Amm
Drainpipe ConnectionN/A
Maximum Drain HeightN/Amm

Dimensions

AMB230 dimensions specifications
SpecificationValueUnit
Dry Weight95kg
Product Height605mm
Product Width520mm
Product Depth808mm
Product Footprint0.26square metres

Electrical

AMB230 electrical specifications
SpecificationValueUnit
Max FrequencyTBCHz
Max Voltage240V
Max WattageTBCkW
Standard Amperage13A
Power Of Steam Source2.3kW
Single Phase AvailabilityAvailable

Water

AMB230 water specifications
SpecificationValueUnit
Maximum Water Flow RateInfinityLitres per minute
Minimum Water Flow Rate0Litres per minute
Water Enters Viaa water jug, filled from a tap

Doors

AMB230 doors specifications
SpecificationValueUnit
Number Of Doors1

Process

AMB230 process specifications
SpecificationValueUnit
Steam SourceIn-chamber water heating element
Fitted Vacuum SystemOptional
AMB230 available options
Option codeOption nameDescriptionFeatures
AVC002SSimple VacuumProvides a vacuum phase before and after sterilization to aid with air removal and load drying, reducing time to sterilization. Suitable for use with in-chamber steam generation.Improves Air Removal; Requires Compressed Air; Speeds Up Cycle Times
CFR021FDA 21 CFR Part 11 Compliant Controller SoftwareProvides compliance to the requirements of 21 CFR Part 11 through data security, data integrity, traceability/audit trails, and electronic signature rules.Compliance / Regulatory Feature; Data / Connectivity Feature
AAP007Chamber Vessel Cooling Fan SystemBlows air across the external surfaces of the sterilization chamber vessel to improve cooling times.Provides Cooling; Speeds Up Cycle Times
AAR014Load Sensed Process TimingA temperature probe with an armoured lead is added to the chamber. Placed inside fluid loads, this probe provides accurate measurement of liquid temperatures, allowing for faster and more controlled liquid sterilization.Fluid Handling Safety Feature; Improves Liquid Loads
AAR122Ethernet InterfaceAllows the autoclave controller to be monitored from compatible digital systems.Data / Connectivity Feature
AAR130Integral Data-PrinterAllows for the generation of physical records.Generates Cycle Records and Printouts
AAN346Discard ContainerA cuboid container that allows the loading and unloading of multiple items simultaneously.Simplifies Loading and Unloading Procedures
AAN5305 Position Shelf Rack With 3 ShelvesAn additional shelf on anti-tilt brackets, typically placed in the centre of the autoclave, providing approximately twice the usable width and depth of chamber space.Modifies Chamber Loading Capabilities
AAN532Additional Shelf For AAN530 Shelf RackAn additional shelf on anti-tilt brackets, typically placed in the centre of the autoclave, providing approximately twice the usable width and depth of chamber space.Modifies Chamber Loading Capabilities
IQ/OQ001IQ/OQ Documents PackageCompletion of the Installation Qualification (IQ) and Operational Qualification (OQ) documentation by an Astell Service Engineer. Requires verification to be valid.Compliance / Regulatory Feature
IQ/OQ003Completion of IQ/OQ DocumentationCompletion of the Installation Qualification (IQ) and Operational Qualification (OQ) documentation by an Astell Service Engineer. Requires verification to be valid.Compliance / Regulatory Feature
UKAS001UKAS CalibrationCalibration of the autoclave to specified temperatures as per the requirements of ISO 17025:2005.Compliance / Regulatory Feature
UKASVALLoad ValidationMultipoint Load Validation Service provided by an Astell Services Autoclave Engineer.Compliance / Regulatory Feature; Provides Validated Evidence of Load Meeting Requirements

AMB240 - 63 Litre Ecofill Benchtop Autoclave

The AMB240 is a Low Water and Power Consumption 63 Litre Ecofill Benchtop Autoclave with a circular front-facing chamber aperture and the Astell Ecofill water and heat recycling system. It is compatible with optional components for additional sterilization, documentation, cooling, connectivity, validation and compliance requirements.

AMB240 product summary
Model codeAMB240
Product name63 Litre Ecofill Benchtop Autoclave
RangeLow Water and Power Consumption
Product typeBenchtop Ecofill Autoclave with a Circular Front Facing Chamber Aperture
DescriptionAn Astell autoclave with a 63 litre chamber that has a circular front-facing aperture, with the Astell Ecofill water and heat recycling system. Compatible with a range of optional components to extend the range of sterilizable load types.

AMB240 specifications

Air

AMB240 air specifications
SpecificationValueUnit
Peak Air Flow For Air BallastN/ALitres per minute
Connecting Airline Hose Size For Air BallastN/Amm
Peak Air Pressure For Air BallastN/Abar
Second Airline Supply Connection SizeN/Amm
Second Peak Air Supply FlowN/ALitres per minute
Second Peak Air Supply PressureN/Abar
Second Air Supply UseN/A

Chamber

AMB240 chamber specifications
SpecificationValueUnit
Chamber Depth671mm
Chamber FinishElectropolished
Chamber Height345mm
Chamber Volume63Litres
Chamber Width345mm

Drain

AMB240 drain specifications
SpecificationValueUnit
Required Features of Drainage SystemN/A
Drain MaterialN/A
Drain PositionN/A
Drain SizeN/Amm
Drainpipe ConnectionN/A
Maximum Drain HeightN/Amm

Dimensions

AMB240 dimensions specifications
SpecificationValueUnit
Dry Weight134kg
Product Height605mm
Product Width520mm
Product Depth1006mm
Product Footprint0.32square metres

Electrical

AMB240 electrical specifications
SpecificationValueUnit
Max FrequencyTBCHz
Max Voltage230V
Max WattageTBCkW
Standard Amperage13A
Power Of Steam Source2.3kW
Single Phase AvailabilityAvailable

Water

AMB240 water specifications
SpecificationValueUnit
Maximum Water Flow RateInfinityLitres per minute
Minimum Water Flow Rate0Litres per minute
Water Enters Viaa water jug, filled from a tap

Doors

AMB240 doors specifications
SpecificationValueUnit
Number Of Doors1

Process

AMB240 process specifications
SpecificationValueUnit
Steam SourceIn-chamber water heating element
Fitted Vacuum SystemOptional
AMB240 available options
Option codeOption nameDescriptionFeatures
No options listed in the source data.